GC FUJI ORTHO BAND

$ 60.65

Category: Product ID: 19947
Description GC Fuji ORTHO BAND is a blue, resin modified glass ionomer for bonding orthodontic bands. It can also be used for the cementation of appliances retained with stainless steel crowns (ex: Herbst or expansion appliances). The new Paste Pak Dispenser saves time and reduces waste. It delivers consistent mixes every time, no matter the amount that the mix requires. Simply adjust the dispensers metering slide and dispense the exact amount of GC Fuji ORTHO BAND Cement you need with the exact mixing ratio for optimized physical properties. GC Fuji ORTHO BAND Cement mixes within 15 seconds and has about 3½ minutes working time with final set after 3 minutes (in the mouth). Its blue color distinguishes the cement for easy clean-up and removal. Categories: Adhesive and Bonding Agents, GC, Light Cure Adhesives Show moreShow less

Features

Two Lights with a powerful 3000 lumens each featuring BridgeLux Gen 7 Vero COB LED Array.

Auto Bright mode adjusts from 300 to 3000 lumens to preserve your eye’s natural night vision and extends battery life.

Auto Flash Detect mode*.  Light turns off for 1 second when detecting external flash. Flash detect can be turned on or off. Flash detect works in all 5 light modes.

One button control for easy operation. One button to power light on/off and select brightness.

Five Light modes: 3 white modes (Manually adjust to 100%, 50% or 25%), 1 white Auto (Automatically adjusts from 10% to 100%) and 1 Red light mode.

60 minute burn time at full power.

Constant brightness – Regulated circuitry so light won’t dim with battery power.

80 Color Rendering Index (CRI) that mimics natural daylight.

Easy to expand with Flex-Connect™ trays, grip and flex arms.

120° wide beam angle evenly illuminates the subject with no hot spots. 90° underwater.

Emergency mode emits blinking light or SOS signal to alert others of distress. Activated by holding down power button for 5 seconds from power off state.

Depth rated to 330 ft (100m).

Corrosion-proof metal light head for heat dispersion and durability.

Removable 25Wh 3400 mAh Li-Ion battery w/ charger and international plug adapters included.

Waterproof battery compartment protects internal electronics even if light accidentally floods.

Protective circuitry – The light and battery feature integrated protective circuits that cuts power in the unlikely event the light overheats or short circuits.

Safety pressure release valve – one-way waterproof valve releases battery compartment pressure in the unlikely event of battery malfunction.

Specifications

Sea Dragon 3000F Auto (Specifications for each light head)

Body Material Anodized aluminum light head with fiber-reinforced polycarbonate body
Light Source/Bulb Type 1x COB LED Array (BridgeLux  Gen 7 Vero LED Array – BXRE-50E4001-C-74)
2x Cree XP-E red LED’s
Brightness White light: 3000 lumens (maintained throughout run time at full power)
Red light:  180 lumens
Brightness Control/Light Modes 100% white → 50% white → 25% white → Auto white → Red → repeat cycle
Color Temperature 5000K
Color Rendering Index* 80
Beam Angle White Light: 120° on land / 90° underwater
Red light: 88° on land / 66° underwater
Battery Lithium Ion 7.4V, 3400 mAh, 25Wh (included)
Battery Charge Time 170 minutes
Run Time 60 minutes at full power, 120 min at half power or Auto, 240 min at quarter power
Depth Tested to 330 feet/100 meters
Dimensions 8.5″ x 9.5″ x 2.3″ (22cm x 24cm x 6cm) fully assembled with light head, battery, grip and tray;  5.1″ x 2.2″ x 4.1″ (13cm x 5.6cm x 10.4cm) head only
Weight 14.4 ounces (408 grams) light head w/battery installed (for each light head)
Bulb Life 35,000 hours
O-ring Dual silicone O-rings (lube included)
Buoyancy Negative; -111 grams underwater (for each light head)

*CRI is a measure of a light source’s ability to show object colors “realistically” or “naturally” compared to daylight, which has a CRI of 100 and represents the maximum value.

The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.

Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.

 

What's Included

Two Sea Dragon 3000F Auto Underwater Photo/Video Light heads
Flex-Connect Dual Tray w/ standard ¼-20 mounting screw
Two Flex-Connect grips
Two 25Wh Lithium Ion batteries
Two AC Power Adapters, two charging trays, and international plug adapters
Adapter for GoPro cameras with acorn nut
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Sea Dragon Duo case

With & Without Light

You may also like…